Solid Carbide Ball Nose End Mill
1867A
Article number 1867A.010 | EAN 4037753167618
-
Unit of measurement: metric
without chip breaker
Ball nose (full radius)
Recommended feed directions of the respective cutters
Recommended ramping angle
Carbide ball nose end mill in long design for finishing operations in almost all materials.
Product features and benefits:
Suitable for HSC finishing.TIALN coating for longer tool life.
International comparison of workpiece materials- cutting diameter Ød₁ [mm]:
- 10 mm
- cutting tolerance:
- h10
- radius r₁ [mm]:
- 5 mm
- cutting length l₂ [mm]:
- 22 mm
- neck length l₃ [mm]:
- 30 mm
- overall length l₁:
- 72 mm
- neck diameter Ød₃:
- 9.7 mm
- shank diameter Ød₂ [mm]:
- 10 mm
- shank diameter tolerance:
- h6
- number of flutes Z:
- 4
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- product line:
- FRANKEN
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
Technical details
- cutting diameter Ød₁ [mm]:
- 10 mm
- cutting tolerance:
- h10
- radius r₁ [mm]:
- 5 mm
- cutting length l₂ [mm]:
- 22 mm
- neck length l₃ [mm]:
- 30 mm
- overall length l₁:
- 72 mm
- neck diameter Ød₃:
- 9.7 mm
- shank diameter Ød₂ [mm]:
- 10 mm
- shank diameter tolerance:
- h6
- number of flutes Z:
- 4
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- product line:
- FRANKEN
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
cutting diameter Ød₁ [mm]
10 mm
cutting tolerance
h10
radius r₁ [mm]
5 mm
cutting length l₂ [mm]
22 mm
neck length l₃ [mm]
30 mm
overall length l₁
72 mm
neck diameter Ød₃
9.7 mm
shank diameter Ød₂ [mm]
10 mm
shank diameter tolerance
h6
number of flutes Z
4
cutting material
carbide
category
Ball Nose End Mill
version
Ball Nose
product line
FRANKEN
tool interface
straight shank
tool interface norm
DIN 6535
coating
TIALN
internal coolant supply
without internal cooling
helix angle
30 deg
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
Downloads to the product
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
- 3D tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active
- 2D tool documentation (PDF) Please log in for the file download. Please also note that your registration should be active
- 2D-Dokumentationszeichnung (PDF) Please log in for the file download. Please also note that your registration should be active
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active