Milling Technology - End mill cutters
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535, ASME
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535, ASME
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535
- coating:
- GLT
- internal coolant supply:
- without internal cooling
- helix angle:
- 45 deg, 38-40 deg
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535
- coating:
- without coating
- internal coolant supply:
- without internal cooling
- helix angle:
- 45 deg, 38-40 deg
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- GLT
- internal coolant supply:
- without internal cooling
- helix angle:
- 45 deg, 38-40 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- coating:
- without coating
- internal coolant supply:
- without internal cooling
- helix angle:
- 40 deg
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- without coating
- internal coolant supply:
- without internal cooling
- helix angle:
- 45 deg, 38-40 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- coating:
- without coating
- internal coolant supply:
- without internal cooling
- helix angle:
- 40 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight Shank with assembled stop ring
- coating:
- without coating
- internal coolant supply:
- without internal cooling
- helix angle:
- 40 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
Carbide end mill Top-Cut with lateral drive flat and long version for roughing and finishing in almost all materials.
Carbide end mill Top-Cut in long design for roughing and finishing in almost all materials.
Carbide end mill Alu-Cut in long version with lateral drive flat for roughing and finishing in wrought aluminium alloys and copper alloys.
Carbide end mill Alu-Cut in long version with lateral drive flat for roughing and finishing in wrought aluminium alloys.
Carbide end mill Alu-Cut in long design for roughing and finishing wrought aluminium alloys and copper alloys.
Dental carbide ball-nose end mill for roughing, finishing and machining residual material in PMMA/ PEEK and wax.
Carbide end mill Alu-Cut in long version for roughing and finishing in wrought aluminium alloys.
Dental carbide ball-nose end mill for roughing, finishing and machining residual material in PMMA/ PEEK and wax.
Dental carbide ball-nose end mill with brass end stop for roughing, finishing and machining residual material in wax and PMM/PEEK.
Dental carbide ball-nose end mill for roughing, pre-finishing, finishing and machining residual material in cobalt-chrome.