Milling Technology - End mill cutters
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
-
without chip breakerBall nose (full radius)Recommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
-
without chip breakerHigh precision corner radius for 3D operationsRecommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Torus End Mill
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
-
without chip breakerHigh precision corner radius for 3D operationsRecommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Torus End Mill
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
Carbide ball-nose end mill Hard-Cut in short design (3xD) for finishing applications in hardened workpiece materials.
Carbide ball-nose end mill Top-Cut in long version (5xD) for universal roughing and finishing applications in many materials.
Carbide ball-nose end mill Hard-Cut with 4 flutes in long design (5xD) for finishing applications in hardened workpiece materials.
Carbide ball-nose end mill Hard-Cut with 4 flutes in extra long design (8xD) for finishing applications in hardened workpiece materials.
Carbide ball-nose cutter Hard-Cut in short design (3xD) for roughing - and finishing applications in hardened workpiece materials.
Carbide ball-nose cutter Hard-Cut in extra short design (1.5xD) for roughing and finishing applications in hardened workpiece materials.
Carbide ball-nose cutter Hard-Cut in extra long design (8xD) for roughing - and finishing applications in hardened workpiece materials.
Carbide ball-nose end mill Hard-Cut in long design (5xD) for roughing and finishing applications in hardened workpiece materials.
Carbide torus end mill Hard-Cut in long design (5xD) for finishing applications in hardened workpiece materials.
Carbide torus end mill Hard-Cut in short design (3xD) for finishing applications in hardened workpiece materials.