Milling Technology - End mill cutters

7400 suitable variants
Metric unit system: metric
Reset all filters
    • Finishing end mill without chip breaker for almost all materials.
      Corner protection chamfer (bevelled edge) for stabilization of the edge
      Recommended feed directions of the respective cutters
      The specific angle of 3° to 5° is the recommended angle for ramping applications

    TOP-Cut carbide end mill in long design for roughing and finishing in almost all materials.

    cutting material:
    HM
    category:
    End Mill
    version:
    Flat Face (Bevelled Edge)
    tool interface:
    straight shank
    tool interface norm:
    DIN 6535
    coating:
    TIALN
    internal coolant supply:
    without internal cooling
    helix angle:
    34-38 deg
    • Finishing end mill without chip breaker for almost all materials.
      Corner radius for the stabilization of the edge
      Recommended feed directions of the respective cutters
      The specific angle of 3° to 5° is the recommended angle for ramping applications

    TOP-Cut carbide end mill in long design for roughing and finishing in almost all materials.

    cutting material:
    HM
    category:
    End Mill
    version:
    Corner Radius
    tool interface:
    straight shank
    tool interface norm:
    DIN 6535
    coating:
    TIALN
    internal coolant supply:
    without internal cooling
    helix angle:
    35-38 deg
    • Roughing end mill with round and fine knuckle form profile.
      Corner protection chamfer (bevelled edge) for stabilization of the edge
      Recommended feed directions of the respective cutters
      The specific angle of 3° to 5° is the recommended angle for ramping applications

    Multi-Cut carbide end mill in long design, with lateral driving flat and short flute length for high-performance roughing in many materials.

    cutting material:
    HM
    category:
    End Mill
    version:
    Flat Face (Bevelled Edge)
    tool interface:
    straight shank with side-lock clamping flat
    tool interface norm:
    DIN 6535
    coating:
    TIALN
    internal coolant supply:
    without internal cooling
    helix angle:
    45 deg
    • Roughing end mill with round and fine knuckle form profile.
      Radius to be programmed in CAM
      Recommended feed directions of the respective cutters
      The specific angle of 3° to 5° is the recommended angle for ramping applications

    Multi-Cut Duplex carbide end mill in long design for high-performance roughing in almost all materials.

    cutting material:
    HM
    category:
    End Mill
    version:
    Corner Radius (Duplex)
    tool interface:
    straight shank
    tool interface norm:
    DIN 6535
    coating:
    TIALN
    internal coolant supply:
    ICA
    helix angle:
    45 deg
    • Semi-finishing end mill with flat and fine knuckle form profile.
      Corner protection chamfer (bevelled edge) for stabilization of the edge
      Recommended feed directions of the respective cutters
      The specific angle of 3° to 5° is the recommended angle for ramping applications

    TiNox-Cut carbide end mill with lateral driving flat for roughing operations in materials that are difficult to machine.

    cutting material:
    HM
    category:
    End Mill
    version:
    Flat Face (Bevelled Edge)
    tool interface:
    straight shank with side-lock clamping flat
    tool interface norm:
    DIN 6535
    coating:
    TIN / TIALN
    internal coolant supply:
    ICA
    helix angle:
    45 deg
    • Semi-finishing end mill with flat and fine knuckle form profile.
      Corner radius for the stabilization of the edge
      Recommended feed directions of the respective cutters
      The specific angle of 3° to 5° is the recommended angle for ramping applications

    TiNox-Cut carbide end mill in extra long design for roughing operations in materials that are difficult to machine.

    cutting material:
    HM
    category:
    End Mill
    version:
    Corner Radius
    tool interface:
    straight shank
    tool interface norm:
    DIN 6535
    coating:
    TIN / TIALN
    internal coolant supply:
    ICA
    helix angle:
    45 deg
    • Finishing end mill without chip breaker for soft materials.
      Corner radius for the stabilization of the edge
      Recommended feed directions of the respective cutters

    Alu-Cut carbide end mill with lateral driving flat and long design for roughing and finishing in wrought aluminium alloys and copper alloys.

    cutting material:
    HM
    category:
    End Mill
    version:
    Corner Radius
    tool interface:
    straight shank with side-lock clamping flat
    tool interface norm:
    DIN 6535
    coating:
    GLT
    internal coolant supply:
    without internal cooling
    helix angle:
    38-40 deg
    • Roughing end mill with round and coarse knuckle form profile for soft materials.
      Corner protection chamfer (bevelled edge) for stabilization of the edge
      Recommended feed directions of the respective cutters
      The specific angle of 3° to 5° is the recommended angle for ramping applications

    Alu-Cut carbide end mill in long design for roughing in wrought aluminium alloys and copper alloys.

    cutting material:
    HM
    category:
    End Mill
    version:
    Flat Face (Bevelled Edge)
    tool interface:
    straight shank
    tool interface norm:
    DIN 6535
    coating:
    GLT
    internal coolant supply:
    without internal cooling
    helix angle:
    40 deg
    • Finishing end mill without chip breaker for hardened materials.
      Corner protection chamfer (bevelled edge) for stabilization of the edge
      Recommended feed directions of the respective cutters

    Hard-Cut carbide end mill in extra long design for finishing in high-strength materials up to 66 HRC.

    cutting material:
    HM
    category:
    End Mill
    version:
    Flat Face (Bevelled Edge)
    tool interface:
    straight shank
    tool interface norm:
    DIN 6535
    coating:
    TIALN
    internal coolant supply:
    without internal cooling
    helix angle:
    50 deg
    • Finishing end mill without chip breaker for hardened materials.
      High precision corner radius for 3D-operations
      Recommended feed directions of the respective cutters
      The specific angle of 3° to 5° is the recommended angle for ramping applications

    Hard-Cut carbide torus end mill for finishing applications in many materials, including hard materials.

    cutting material:
    HM
    category:
    Torus End Mill
    tool interface:
    straight shank
    tool interface norm:
    DIN 6535
    coating:
    TIALN
    internal coolant supply:
    without internal cooling
    helix angle:
    0 deg