Solid Carbide Ball Nose End Mill
1821A
Article number 1821A.016 | EAN 4037753158395
-
Unit of measurement: metric
without chip breaker
Ball nose (full radius)
Recommended feed directions of the respective cutters
Carbide ball nose end mill with lateral driving flat for machining small engravings and components, can be used in almost all materials.
Product features and benefits:
Extra short, stable design.Optimised chisel edge, suitable for HSC finishing.TIALN coating for longer tool life.
International comparison of workpiece materials- cutting diameter Ød₁ [mm]:
- 16 mm
- cutting tolerance:
- h10
- radius r₁ [mm]:
- 8 mm
- cutting length l₂ [mm]:
- 22 mm
- neck length l₃ [mm]:
- 32 mm
- projecting length lₐ:
- 34 mm
- overall length l₁:
- 82 mm
- neck diameter Ød₃:
- 15.5 mm
- shank diameter Ød₂ [mm]:
- 16 mm
- shank diameter tolerance:
- h6
- number of flutes Z:
- 2
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- product line:
- FRANKEN
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
Technical details
- cutting diameter Ød₁ [mm]:
- 16 mm
- cutting tolerance:
- h10
- radius r₁ [mm]:
- 8 mm
- cutting length l₂ [mm]:
- 22 mm
- neck length l₃ [mm]:
- 32 mm
- projecting length lₐ:
- 34 mm
- overall length l₁:
- 82 mm
- neck diameter Ød₃:
- 15.5 mm
- shank diameter Ød₂ [mm]:
- 16 mm
- shank diameter tolerance:
- h6
- number of flutes Z:
- 2
- cutting material:
- carbide
- category:
- Ball Nose End Mill
- version:
- Ball Nose
- product line:
- FRANKEN
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 30 deg
cutting diameter Ød₁ [mm]
16 mm
cutting tolerance
h10
radius r₁ [mm]
8 mm
cutting length l₂ [mm]
22 mm
neck length l₃ [mm]
32 mm
projecting length lₐ
34 mm
overall length l₁
82 mm
neck diameter Ød₃
15.5 mm
shank diameter Ød₂ [mm]
16 mm
shank diameter tolerance
h6
number of flutes Z
2
cutting material
carbide
category
Ball Nose End Mill
version
Ball Nose
product line
FRANKEN
tool interface
straight shank with side-lock clamping flat
tool interface norm
DIN 6535
coating
TIALN
internal coolant supply
without internal cooling
helix angle
30 deg
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
Downloads to the product
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active
- 2D-Dokumentationszeichnung (PDF) Please log in for the file download. Please also note that your registration should be active
- 3D tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active
- 2D tool documentation EN (PDF) Please log in for the file download. Please also note that your registration should be active
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active