carbide ball-nose end mill extra short type N

Carbide ball-nose end mill with lateral drive flat for machining small engravings and components in almost all materials.

Product features and benefits:

Extra short, robust design.
Optimised chisel edge, suitable for HSC finishing.
TIALN coating for longer tool life.

International Material Comparison

Technical details

cutting diameter Ød₁ [mm]:: 10 mm
cutting tolerance:: h10
radius r₁ [mm]:: 5 mm
cutting length l₂ [mm]:: 14 mm
neck length l₃ [mm]:: 24 mm
projecting length lₐ:: 26 mm
overall length l₁:: 66 mm
neck diameter Ød₃:: 9.7 mm
shank diameter Ød₂ [mm]:: 10 mm
shank diameter tolerance:: h6
number of flutes Z:: 2
cutting material:: carbide
category:: Ball Nose End Mill
version:: Ball Nose
product line:: FRANKEN
tool interface:: straight shank with side-lock clamping flat
tool interface norm:: DIN 6535
coating:: TIALN
internal coolant supply:: without internal cooling
helix angle:: 30 deg

cutting diameter Ød₁ [mm]

10 mm

cutting tolerance

h10

radius r₁ [mm]

5 mm

cutting length l₂ [mm]

14 mm

neck length l₃ [mm]

24 mm

projecting length lₐ

26 mm

overall length l₁

66 mm

neck diameter Ød₃

9.7 mm

shank diameter Ød₂ [mm]

10 mm

shank diameter tolerance

number of flutes Z

cutting material

carbide

Material	Steel materials Search for value P1.1 Cold-extrusion steels, Construction steels, Free-cutting steels, etc. <= 600 N/mm² P2.1 Construction steels, Cementation steels, Steel castings, etc. <= 800 N/mm² P3.1 Cementation steels, Heat-treatable steels, Cold work steels, etc. <= 1000 N/mm² P4.1 Heat-treatable steels, Cold work steels, Nitriding steels, etc. <= 1200 N/mm² P5.1 High-alloyed steels, Cold work steels, Hot work steels, etc. <= 1400 N/mm² No results found Stainless steel materials Search for value M1.1 Ferritic, martensitic <= 950 N/mm² M2.1 Austenitic <= 950 N/mm² M3.1 Austenitic-ferritic (Duplex) <= 1100 N/mm² M4.1 Austenitic-ferritic heat-resistant (Super Duplex) <= 1250 N/mm² No results found Cast materials Search for value K1.1 Cast iron with lamellar graphite (GJL) 100-250 N/mm² K1.2 Cast iron with lamellar graphite (GJL) 250-450 N/mm² K2.1 Cast iron with nodular graphite (GJS) 350-500 N/mm² K2.2 Cast iron with nodular graphite (GJS) 500-900 N/mm² K3.1 Cast iron with vermicular graphite (GJV) 300-400 N/mm² K3.2 Cast iron with vermicular graphite (GJV) 400-500 N/mm² K4.1 Malleable cast iron (GTMW, GTMB) 250-500 N/mm² K4.2 Malleable cast iron (GTMW, GTMB) 500-800 N/mm² No results found Non ferrous materials Search for value N2.1 Pure copper, low-alloyed copper <= 400 N/mm² N2.2 Copper-zinc alloys (brass, long-chipping) <= 550 N/mm² N2.3 Copper-zinc alloys (brass, short-chipping) <= 550 N/mm² N2.4 Copper-aluminium alloys (alu bronze, long-chipping) <= 800 N/mm² N2.5 Copper-tin alloys (tin bronze, long-chipping) <= 700 N/mm² N2.6 Copper-tin alloys (tin bronze, short-chipping) <= 400 N/mm² N2.7 Special copper alloys <= 600 N/mm² N2.8 Special copper alloys <= 1400 N/mm² N3.1 Magnesium wrought alloys <= 500 N/mm² N3.2 Magnesium wrought alloys <= 500 N/mm² N4.1 Duroplastics (short-chipping) N4.2 Thermoplastics (long-chipping) N5.2 Tungsten-copper alloys N5.3 Composite materials No results found Special materials Search for value S1.1 Pure titanium <= 450 N/mm² S1.2 Titanium alloys <= 900 N/mm² S1.3 Titanium alloys <= 1250 N/mm² S2.1 Pure nickel <= 600 N/mm² S2.2 Nickel-base alloys <= 1000 N/mm² S2.3 Nickel-base alloys <= 1600 N/mm² S2.4 Cobalt-base alloys <= 1000 N/mm² S2.5 Cobalt-base alloys <= 1600 N/mm² S2.6 Iron-base alloys <= 1500 N/mm² No results found

Unit	Millimeter Inch
infeed ae	i
machining depth	i
max. rotation speed of machine	1/min i

Solid Carbide Ball Nose End Mill

Product features and benefits:

Accessories

Shrink-Fit Chucks

Shrink-Fit Chucks

Holder for Shanks acc. DIN 6535 HB / DIN 1835 B

Holder for Shanks acc. DIN 6535 HB / DIN 1835 B