Milling Technology - Cutters with assembly hole
-
without chip breaker
- cutting material:
- HSS
- category:
- V-Shaped Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSSE
- category:
- Radius Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
with round, coarse chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- without coating
- helix angle:
- 25 deg
-
without chip breakerSharp-edgedRecommended feed directions of the respective cutters
- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- without coating
- helix angle:
- 25 deg
-
without chip breakerSharp-edgedRecommended feed directions of the respective cutters
- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- without coating
- helix angle:
- 30 deg
-
without chip breaker
- cutting material:
- HSSE
- category:
- Side and Face Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
with fine, round chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- TICN
- helix angle:
- 25 deg
-
with flat, medium chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- TICN
- helix angle:
- 25 deg
-
with round, coarse chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- TICN
- helix angle:
- 25 deg
-
with fine, round chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- without coating
- helix angle:
- 25 deg
HSS prismatic milling cutter, DIN 138/ DIN 847, for milling prismatic notches or guides and chamfering operations in steel, cast iron or short-chipping non-ferrous materials.
HSS semi-round profile milling cutter, DIN 138/ DIN 856, for milling in steel materials, cast iron or short-chipping non-ferrous materials.
HSS shell end mill, DIN 1880, for face and corner milling with large stock removal rates (roughing applications) in simple steel and cast iron materials as well as copper alloys.
HSS shell end mill DIN 1880, for face and corner milling with low cutting depths (finishinging) in almost all steel materials and non-ferrous metals.
HSS shell end mill, DIN 1880, for face and corner milling with large stock removal rates in light metals and fibre-free plastics.
HSS disc milling cutter acc. to DIN 138 / 885, cross-toothed for milling deep grooves, cut-off milling or cutting to length in steel and cast iron materials as well as short-chipping non-ferrous metals.
HSS shell end mill DIN 1880, for face and corner milling with large chip removal volume (roughing) in almost all steel materials and non-ferrous metals.
HSS shell end mill DIN 1880, for face and corner milling (roughing/finishing) in almost all steel materials and non-ferrous metals.
HSS shell end mill, DIN 1880, for face and corner milling with large stock removal rates (roughing applications) in simple steel and cast iron materials as well as copper alloys.
HSS shell end mill DIN 1880, for face and corner milling with large chip removal volume (roughing) in almost all steel materials and non-ferrous metals.