Milling Technology - Cutters with assembly hole
-
_Web_Typ_NR_grob.svg)
with round, coarse chip breaker
_Web_Stirnkontur_Kantenbruch.svg)
Corner protection chamfer (bevelled edge) for stabilisation of the edge
_Web_Vorschub_radial.svg)
Recommended feed directions of the respective cutters
- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- TICN
- helix angle:
- 25 deg
-
_Web_Typ_N.svg)
without chip breaker
_Web_Stirnkontur_scharfkantig.svg)
Sharp-edged
Recommended feed directions of the respective cutters
- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- TICN
- helix angle:
- 25 deg
-
without chip breaker
- cutting material:
- HSSE
- category:
- Side and Face Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSS
- category:
- V-Shaped Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
_Web_Typ_H.svg)
without chip breaker
- cutting material:
- HSS
- category:
- Metal Slitting Saws
- tool interface:
- Straight bore
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSSE
- category:
- Side and Face Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSSE
- category:
- Side and Face Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSSE
- category:
- Spur Wheel Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- carbide
- category:
- Metal Slitting Saws
- tool interface:
- Straight bore
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- carbide
- category:
- Metal Slitting Saws
- tool interface:
- Straight bore
- tool interface norm:
- DIN 138
_4050C.jpg)
HSS shell end mill, DIN 1880, for face and shoulder milling with high material removal (roughing applications) in simple steel and cast materials as well as copper alloys.
_4010C.jpg)
HSS shell end mill, DIN 1880, for face and shoulder milling with low cutting depths (finishing applications) in almost all steel materials and non-ferrous metals.
_4410.jpg)
HSS side and face milling cutter, DIN 138/885, with coarse staggered toothing for milling deep slots, cutting-off or cutting to length of steel and cast materials as well as short-chipping non-ferrous metals.
_4660.jpg)
HSS double-angle milling cutter, DIN 138/DIN 847, for milling prismatic notches or guides as well as chamfering in steel, cast iron or short-chipping non-ferrous materials.
_4500.jpg)
HSS metal slitting saw, DIN 138, fine toothing, for milling slots, cutting-off or cutting to length in steel and cast materials as well as short-chipping non-ferrous metals.
_4461.jpg)
Narrow HSS side and face milling cutter, DIN 138/1834, with staggered toothing for milling deep slots, slotting, cutting-off or cutting to length of steel and cast materials as well as short-chipping non-ferrous metals.
_4455.jpg)
HSS side and face milling cutter, DIN 138/885, with straight toothing for milling deep slots, cutting-off or cutting to length of steel and cast materials as well as short-chipping non-ferrous metals.
_5500.jpg)
HSS involute gear cutter, DIN 138/DIN 847, for milling spur gear teeth in the single indexing method in steel, cast iron or short-chipping non-ferrous materials.
_4515.jpg)
Carbide metal slitting saw, coarse toothing, for milling slots, cutting-off or cutting to length in almost all steel materials and non-ferrous metals.
_4505.jpg)
Carbide metal slitting saw, fine toothing, for milling slots, cutting-off or cutting to length in almost all steel materials and non-ferrous metals.