Milling Technology - accessories for drills

708 Suitable variants

    HSS shell end mill, DIN 1880, for face and shoulder milling with high material removal (roughing applications) in simple steel and cast materials as well as copper alloys.

    cutting material:
    HSSE
    category:
    Shell End Mill
    tool interface:
    Bore with Keyway, Driving Slot
    tool interface norm:
    DIN 138
    coating:
    TICN
    helix angle:
    25 deg

    HSS shell end mill, DIN 1880, for face and shoulder milling with low cutting depths (finishing applications) in almost all steel materials and non-ferrous metals.

    cutting material:
    HSSE
    category:
    Shell End Mill
    tool interface:
    Bore with Keyway, Driving Slot
    tool interface norm:
    DIN 138
    coating:
    TICN
    helix angle:
    25 deg

    HSS side and face milling cutter, DIN 138/885, with coarse staggered toothing for milling deep slots, cutting-off or cutting to length of steel and cast materials as well as short-chipping non-ferrous metals.

    cutting material:
    HSSE
    category:
    Side and Face Milling Cutter
    tool interface:
    Bore with Standard Keyway
    tool interface norm:
    DIN 138

    HSS metal slitting saw, DIN 138, fine toothing, for milling slots, cutting-off or cutting to length in steel and cast materials as well as short-chipping non-ferrous metals.

    cutting material:
    HSS
    category:
    Metal Slitting Saws
    tool interface:
    Straight bore
    tool interface norm:
    DIN 138

    HSS metal slitting saw, DIN 138, coarse toothing, for milling slots, cutting-off or cutting to length in steel and cast materials as well as short-chipping non-ferrous metals.

    cutting material:
    HSS
    category:
    Metal Slitting Saws
    tool interface:
    Straight bore
    tool interface norm:
    DIN 138

    Carbide metal slitting saw, fine toothing, for milling slots, cutting-off or cutting to length in almost all steel materials and non-ferrous metals.

    cutting material:
    HM
    category:
    Metal Slitting Saws
    tool interface:
    Straight bore
    tool interface norm:
    DIN 138

    Carbide metal slitting saw, coarse toothing, for milling slots, cutting-off or cutting to length in almost all steel materials and non-ferrous metals.

    cutting material:
    HM
    category:
    Metal Slitting Saws
    tool interface:
    Straight bore
    tool interface norm:
    DIN 138

    HSS shell-type single-angle milling cutter, DIN 138/DIN 842, for milling angular guides, angular grooves or chamfers in steel, cast iron or short-chipping non-ferrous materials.

    cutting material:
    HSS
    category:
    Angle Milling Cutter
    tool interface:
    Bore with Standard Keyway
    tool interface norm:
    DIN 138

    HSS involute gear cutter, DIN 138/DIN 847, for milling spur gear teeth in the single indexing method in steel, cast iron or short-chipping non-ferrous materials.

    cutting material:
    HSSE
    category:
    Spur Wheel Milling Cutter
    tool interface:
    Bore with Standard Keyway
    tool interface norm:
    DIN 138

    HSS side and face milling cutter, DIN 138/885, with straight toothing for milling deep slots, cutting-off or cutting to length of steel and cast materials as well as short-chipping non-ferrous metals.

    cutting material:
    HSSE
    category:
    Side and Face Milling Cutter
    tool interface:
    Bore with Standard Keyway
    tool interface norm:
    DIN 138