VHM-EF-Drill-VA-DIN 6537L-HA-IK-2FF-ALCR-89
EF-Drill twist drills
Article number TA214524.0350
Solid carbide twist drill EF-Drill, DIN 6537L in VA geometry for use in stainless steel materials.
Product features and benefits:
Internal cooling channels for high process reliability.Special ALCR coating for excellent wear resistance and drilling performance.
International comparison of workpiece materials- nominal diameter d₁ [mm]:
- 3.5 mm
- nominal diameter [in]:
- 0.138 "
- shank style:
- HA
- type:
- Twist drills
- coolant supply:
- internal coolant supply
- geometry:
- VA
- number of margins:
- 2
- type of construction standard:
- DIN 6537L - ca.5xD
- coating:
- ALCR-89
- shank diameter d₂:
- 6 mm
- OAL l₁:
- 66 mm
- usable length l₃:
- 23 mm
- tool - sense of rotation:
- right hand
- point angle:
- 140 deg
- tolerance work piece:
- IT9-IT10
- cutting tolerance:
- m7
- shank diameter tolerance:
- h6
- cutting material:
- carbide
Technical details
- nominal diameter d₁ [mm]:
- 3.5 mm
- nominal diameter [in]:
- 0.138 "
- shank style:
- HA
- type:
- Twist drills
- coolant supply:
- internal coolant supply
- geometry:
- VA
- number of margins:
- 2
- type of construction standard:
- DIN 6537L - ca.5xD
- coating:
- ALCR-89
- shank diameter d₂:
- 6 mm
- OAL l₁:
- 66 mm
- usable length l₃:
- 23 mm
- tool - sense of rotation:
- right hand
- point angle:
- 140 deg
- tolerance work piece:
- IT9-IT10
- cutting tolerance:
- m7
- shank diameter tolerance:
- h6
- cutting material:
- carbide
nominal diameter d₁ [mm]
3.5 mm
nominal diameter [in]
0.138 "
shank style
HA
type
Twist drills
coolant supply
internal coolant supply
geometry
VA
number of margins
2
type of construction standard
DIN 6537L - ca.5xD
coating
ALCR-89
shank diameter d₂
6 mm
OAL l₁
66 mm
usable length l₃
23 mm
tool - sense of rotation
right hand
point angle
140 deg
tolerance work piece
IT9-IT10
cutting tolerance
m7
shank diameter tolerance
h6
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.
Downloads to the product
- 3D tool model as per DIN 4003 / ISO 13399 (STP) Please log in for the file download. Please also note that your registration should be active
- 2D tool documentation (PDF) Please log in for the file download. Please also note that your registration should be active
- Properties as per DIN 4000 (XML) Please log in for the file download. Please also note that your registration should be active
- 2D tool drawing as per ISO/DTS 13399-70 (DXF) Please log in for the file download. Please also note that your registration should be active
_Hydrodehnspannfutter_HSK-A.jpg)
_Hydrodehnspannfutter_SK.jpg)