Clamping Mandrel

For clamping gear wheels.

Article number HD400111

  • Mounting position: vertically upright with tailstock
    Clamping system SG
H400111_Spannmittel
H400111_Spannmittel_Schnitt
H400111_Werkstueck
    H400111_Spannmittel
    H400111_Spannmittel_Schnitt
    H400111_Werkstueck
    3D

The clamping mandrel is designed for milling the external gearing of the workpiece.

Functional description:

Clamping is initiated via a drawbar on the machine and is transmitted to the clamping bush (system SG) via a quick-change connection and a clamping bolt. In addition, the workpiece is clamped flat on the end faces via a tailstock. Release of clamping is again initiated via the tailstock and the drawbar of the machine. The clamping bush (system SG) is supported by an integrated compression spring.

Advantages:

- Slim design is optimally adapted to the work path of the hobbing cutter
- Reduction of set-up times due to quick-change flange connection
- High-precision clamping of the workpiece
- Additional protection against soiling due to sealing air in the mandrel

category:
Clamping Mandrel
machining:
toothing
workpiece:
gear
industry:
transmission, toothing
clamping-Ø:
41,40 mm
connection spindle side:
short taper 5
connection tailstock side:
SK steep taper
sealing air:
yes
fitting position:
vertically upright with tailst
concentricity at control workpiece :
0,005 mm
transferable torque:
45 Nm
outer-Ø:
125,00 mm
total length:
382,50 mm
weight clamping device:
9,5 kg
weight workpiece:
0,4 kg
material workpiece:
steel
Technical details
category:
Clamping Mandrel
machining:
toothing
workpiece:
gear
industry:
transmission, toothing
clamping-Ø:
41,40 mm
connection spindle side:
short taper 5
connection tailstock side:
SK steep taper
sealing air:
yes
fitting position:
vertically upright with tailst
concentricity at control workpiece :
0,005 mm
transferable torque:
45 Nm
outer-Ø:
125,00 mm
total length:
382,50 mm
weight clamping device:
9,5 kg
weight workpiece:
0,4 kg
material workpiece:
steel
category
Clamping Mandrel
machining
toothing
workpiece
gear
industry
transmission, toothing
clamping-Ø
41,40 mm
connection spindle side
short taper 5
connection tailstock side
SK steep taper
sealing air
yes
fitting position
vertically upright with tailst
concentricity at control workpiece
0,005 mm
transferable torque
45 Nm
outer-Ø
125,00 mm
total length
382,50 mm
weight clamping device
9,5 kg
weight workpiece
0,4 kg
material workpiece
steel
show all

Downloads to the product

There are no downloads for this product.