Clamping Mandrel

For clamping hubs / drive flanges.

Article number HD400014

  • Mounting position: vertically suspended
    Clamping system SZ

The clamping mandrel is designed for turning and grinding the outer contour and the flat faces of the workpiece.

Functional description:

Clamping is initiated via two drawbars on the machine side. The inner drawbar actuates the double taper collet (SZ system) via a quick-change connection and a clamping bolt. The outer drawbar actuates the movable end stop via a second quick-change connection and a drawbar. The endstop is designed as a pendulum stop and it adapts to the flat surface of the workpiece to compensate for axial run-out errors.

Advantages:

- compensation of axial run-out errors by means of integrated pendulum end stop
- movable end stop
- two clamping points
- reduction of set-up times due to quick-change flange connection

category:
Clamping Mandrel
machining:
grinding, turning
workpiece:
hub
industry:
commercial vehicles, powertrain
clamping-Ø:
34,00 mm
connection spindle side:
short taper 8
airflow control device:
direct
sealing air:
yes
clamping tool quick-changeable:
yes
fitting position:
vertically pending
concentricity at control workpiece :
0,010 mm
outer-Ø:
210,00 mm
overall length:
371,00 mm
weight clamping device:
33 kg
Technical details
category:
Clamping Mandrel
machining:
grinding, turning
workpiece:
hub
industry:
commercial vehicles, powertrain
clamping-Ø:
34,00 mm
connection spindle side:
short taper 8
airflow control device:
direct
sealing air:
yes
clamping tool quick-changeable:
yes
fitting position:
vertically pending
concentricity at control workpiece :
0,010 mm
outer-Ø:
210,00 mm
overall length:
371,00 mm
weight clamping device:
33 kg
category
Clamping Mandrel
machining
grinding, turning
workpiece
hub
industry
commercial vehicles, powertrain
clamping-Ø
34,00 mm
connection spindle side
short taper 8
airflow control device
direct
sealing air
yes
clamping tool quick-changeable
yes
fitting position
vertically pending
concentricity at control workpiece
0,010 mm
outer-Ø
210,00 mm
overall length
371,00 mm
weight clamping device
33 kg