Return

Clamping Chuck

For clamping pinion shafts.

Article number HD400003

Mounting position: horizontal

Mounting position: vertically suspended

Clamping system SG

The clamping chuck is designed for a gear milling operation on the tapered outer diameter of the workpiece.

Functional description:

Clamping is initiated via a drawbar on the machine side. The clamping bush (system SG) is actuated via a drawbar with intermediate piece by exceeding the idle stroke. An integrated disk spring assembly supports the clamping bush during unclamping. Interchangeable clamping sets, consisting of intermediate bush and end stop, were installed for the different workpiece sizes.

Advantages:

- slim design
- machining of different workpiece sizes thanks to quick-change clamping elements
- modular design

Details

category:: Clamping Chuck
machining:: toothing
workpiece:: gear
industry:: transmission, toothing, powertrain, measure & test
clamping-Ø:: 40,00 mm
connection spindle side:: SK steep taper
airflow control device:: direct
fitting position:: horizontal, vertically pending
concentricity at control workpiece :: 0,008 mm
transferable torque:: 62 Nm
outer-Ø:: 165,00 mm
total length:: 522,50 mm
weight clamping device:: 17 kg

Technical details

category:: Clamping Chuck
machining:: toothing
workpiece:: gear
industry:: transmission, toothing, powertrain, measure & test
clamping-Ø:: 40,00 mm
connection spindle side:: SK steep taper
airflow control device:: direct
fitting position:: horizontal, vertically pending
concentricity at control workpiece :: 0,008 mm
transferable torque:: 62 Nm
outer-Ø:: 165,00 mm
total length:: 522,50 mm
weight clamping device:: 17 kg

Downloads to the product

There are no downloads for this product.