Clamping Sleeves System SP

For smallest concentricity deviations

Clamping Sleeves System SP

By applying an axial force the clamping sleeves move in direction of the force and expand radially. On the one hand this eliminates the clearance between clamping sleeve and body, on the other hand between clamping sleeve and workpiece. The workpiece is being clamped.

Depending on the tolerance of the workpiece, on the design of the clamping tool and of the clamping sleeves the system SP achieves concentricities of 0.002 mm (corresponding to 0.0001 inch).
Due to this high precision the system SP is not only used to clamp workpieces, it is also used to clamp tools.

The illustration on the left shows a cut of the clamping system in the unclamped and clamped mode.
 

Downloads

EMUGE – Clamping Technology Catalogue 135

download PDF | 25 MB
EMUGE – Mandrels/Chucks System SP

download PDF | 1 MB