Freestechniek - Freesgereedschap met cilindrische schacht
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- Snijmateriaal:
- HM
- Categorie:
- Schachtfrees
- Uitvoering:
- Vlakke snijkant (met afschuining)
- Gereedschap interface:
- Gladde cilindrische schacht
- Standaard gereedschapsinterface:
- DIN 6535, ASME
- Coating:
- TIALN
- Interne koeling:
- Zonder
- Spiraalhoek:
- 35-38°
-
without chip breakerCorner radius for the stabilisation of the cutting edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- Snijmateriaal:
- HM
- Categorie:
- Schachtfrees
- Uitvoering:
- Hoekradius
- Gereedschap interface:
- Gladde cilindrische schacht
- Standaard gereedschapsinterface:
- DIN 6535
- Coating:
- TIALN
- Interne koeling:
- Zonder
- Spiraalhoek:
- 35-38°
-
with round, fine chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- Snijmateriaal:
- HM
- Categorie:
- Schachtfrees
- Uitvoering:
- Vlakke snijkant (met afschuining)
- Gereedschap interface:
- Cylindrische schacht met Weldonvlak
- Standaard gereedschapsinterface:
- DIN 6535, ASME
- Coating:
- TIALN
- Interne koeling:
- Zonder
- Spiraalhoek:
- 45°
-
with round, fine chip breakerRadius to be programmed in CAMRecommended feed directions of the respective cuttersRecommended ramping angle
- Snijmateriaal:
- HM
- Categorie:
- Schachtfrees, High Feed Cutter
- Uitvoering:
- Hoekradius (Duplex)
- Gereedschap interface:
- Gladde cilindrische schacht
- Standaard gereedschapsinterface:
- DIN 6535
- Coating:
- TIALN
- Interne koeling:
- ICA
- Spiraalhoek:
- 45°
-
with flat, fine chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- Snijmateriaal:
- HM
- Categorie:
- Schachtfrees
- Uitvoering:
- Vlakke snijkant (met afschuining)
- Gereedschap interface:
- Cylindrische schacht met Weldonvlak
- Standaard gereedschapsinterface:
- DIN 6535
- Coating:
- TIN / TIALN
- Interne koeling:
- ICA
- Spiraalhoek:
- 45°
-
with flat, fine chip breakerCorner radius for the stabilisation of the cutting edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- Snijmateriaal:
- HM
- Categorie:
- Schachtfrees
- Uitvoering:
- Hoekradius
- Gereedschap interface:
- Gladde cilindrische schacht
- Standaard gereedschapsinterface:
- DIN 6535
- Coating:
- TIN / TIALN
- Interne koeling:
- ICA
- Spiraalhoek:
- 45°
-
without chip breakerCorner radius for the stabilisation of the cutting edgeRecommended feed directions of the respective cutters
- Snijmateriaal:
- HM
- Categorie:
- Schachtfrees
- Uitvoering:
- Hoekradius
- Gereedschap interface:
- Cylindrische schacht met Weldonvlak
- Standaard gereedschapsinterface:
- DIN 6535
- Coating:
- GLT
- Interne koeling:
- Zonder
- Spiraalhoek:
- 38-40°
-
with round, coarse chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- Snijmateriaal:
- HM
- Categorie:
- Schachtfrees
- Uitvoering:
- Vlakke snijkant (met afschuining)
- Gereedschap interface:
- Gladde cilindrische schacht
- Standaard gereedschapsinterface:
- DIN 6535
- Coating:
- GLT
- Interne koeling:
- Zonder
- Spiraalhoek:
- 40°
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- Snijmateriaal:
- HM
- Categorie:
- Schachtfrees
- Uitvoering:
- Vlakke snijkant (met afschuining)
- Gereedschap interface:
- Gladde cilindrische schacht
- Standaard gereedschapsinterface:
- DIN 6535, ASME
- Coating:
- TIALN
- Interne koeling:
- Zonder
- Spiraalhoek:
- 50°
-
without chip breakerHigh precision corner radius for 3D operationsRecommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- Snijmateriaal:
- HM
- Categorie:
- Torusfrees
- Gereedschap interface:
- Gladde cilindrische schacht
- Standaard gereedschapsinterface:
- DIN 6535
- Coating:
- TIALN
- Interne koeling:
- Zonder
- Spiraalhoek:
- 0°
TOP-Cut volhardmetalen schachtfrees, lange uitvoering voor het ruwen en finiseren in diverse materialen.
TOP-Cut volhardmetalen schachtfrees, lange uitvoering voor het ruwen en finiseren in diverse materialen.
Multi-Cut volhardmetalen schachtfrees, lange uitvoering met Weldon opname en een korte snijlengte voor high-performance ruwen in diverse materialen.
Multi-Cut Duplex volhardmetalen schachtfrees, lange uitvoering voor high-performance ruwen in diverse materialen.
TiNox-Cut volhardmetalen schachtfrees met Weldon opname voor het ruwen in moeilijk verspaanbare materialen.
TiNox-Cut volhardmetalen schachtfrees, extra lange uitvoering voor het ruwen in moeilijk verspaanbare materialen.
Alu-Cut volhardmetalen schachtfrees, lange uitvoering met Weldon opname voor het ruwen en finiseren in aluminium gietlegeringen en koperlegeringen.
Alu-Cut volhardmetalen schachtfrees, lange uitvoering voor het ruwen in aluminium gietlegeringen en koperlegeringen.
Hard-Cut volharmetalen schachtfrees, extra lange uitvoering voor het finiseren in materialen met een hoge treksterkte tot 66 Hrc.
Carbide torus end mill Hard-Cut with 4 flutes in short design (3xD) for finishing applications in hardened workpiece materials.