ZBGF-W-2xD-R30-IKZ-HA-TiAlN-T4
solid carbide cicular drill thread mills
Article number GF732857.5048
Machining of tap hole and internal thread.
Product features and benefits:
For workpiece material up to 44 HRCPredrilled tap hole not necessary.Pitch-dependent tool with corrected thread profile.Cross-dimensional.
International Material Comparison- thread symbol:
- UNF
- nominal diameter [in]:
- 0.559 " - 0.63 "
- nominal size:
- 5/8, 9/16
- nominal diameter d₁ [mm]:
- 14.2 mm - 16 mm
- pitch [in]:
- 0.056 "
- pitch [mm]:
- 1.411 mm
- threads per inch:
- 18
- thread orientation:
- internal
- basic version:
- ZBGF - circular drill thread mill
- type:
- ZBGF-W
- coolant supply:
- IKZ
- helix direction:
- R30
- clamping flat:
- HA
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- TIALN-T4
- OAL l₁:
- 98 mm
- shank diameter d₂:
- 16 mm
- length of cutting edge l₂:
- 6.433 mm
- usable length l₃:
- 41 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 11.27
- clamping length l₄:
- 48 mm
- cutting material:
- carbide
Technical details
- thread symbol:
- UNF
- nominal diameter [in]:
- 0.559 " - 0.63 "
- nominal size:
- 5/8, 9/16
- nominal diameter d₁ [mm]:
- 14.2 mm - 16 mm
- pitch [in]:
- 0.056 "
- pitch [mm]:
- 1.411 mm
- threads per inch:
- 18
- thread orientation:
- internal
- basic version:
- ZBGF - circular drill thread mill
- type:
- ZBGF-W
- coolant supply:
- IKZ
- helix direction:
- R30
- clamping flat:
- HA
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- TIALN-T4
- OAL l₁:
- 98 mm
- shank diameter d₂:
- 16 mm
- length of cutting edge l₂:
- 6.433 mm
- usable length l₃:
- 41 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 11.27
- clamping length l₄:
- 48 mm
- cutting material:
- carbide
thread symbol
UNF
nominal diameter [in]
0.559 " - 0.63 "
nominal size
5/8, 9/16
nominal diameter d₁ [mm]
14.2 mm - 16 mm
pitch [in]
0.056 "
pitch [mm]
1.411 mm
threads per inch
18
thread orientation
internal
basic version
ZBGF - circular drill thread mill
type
ZBGF-W
coolant supply
IKZ
helix direction
R30
clamping flat
HA
shank standard
DIN 6535
direction of tool rotation
RH
Coating
TIALN-T4
OAL l₁
98 mm
shank diameter d₂
16 mm
length of cutting edge l₂
6.433 mm
usable length l₃
41 mm
flutes /number of ridges
4
diameter of milling part dF
11.27
clamping length l₄
48 mm
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.