WM-set-F-TIN
tool maker set
Article number H0423101.0100
-
Hole type: through holeHole type: blind holeChamfer form C, chamfer length 2-3 threads
HSSE tap for universal applications in stainless steel materials and Nickel alloys.
Product features and benefits:
For manual tapping, but can also be used with a machine.Finishing tap, also included in multi-part tap sets (tool maker sets)TIN coating for improved thread surfaces and longer tool life.
International Material Comparison- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 10 mm
- pitch [mm]:
- 1.5 mm
- constructional design:
- DIN 352
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- Geometry:
- WM
- Coating:
- TIN
- shank diameter d₂:
- 7 mm
- OAL l₁:
- 70 mm
- length of cutting edge l₂:
- 22 mm
- square ◘:
- 5.5 mm
- tap hole diameter:
- 8.5 mm
- coolant-lubricant:
- thread cutting oil, thread cutting paste
- cutting material:
- HSSE
Technical details
- thread symbol:
- M
- nominal diameter d₁ [mm]:
- 10 mm
- pitch [mm]:
- 1.5 mm
- constructional design:
- DIN 352
- thread sense of rotation:
- right hand
- coolant supply:
- without
- chamfer form:
- Form C
- flute characteristic:
- Rek. a- straight flutes
- Geometry:
- WM
- Coating:
- TIN
- shank diameter d₂:
- 7 mm
- OAL l₁:
- 70 mm
- length of cutting edge l₂:
- 22 mm
- square ◘:
- 5.5 mm
- tap hole diameter:
- 8.5 mm
- coolant-lubricant:
- thread cutting oil, thread cutting paste
- cutting material:
- HSSE
thread symbol
M
nominal diameter d₁ [mm]
10 mm
pitch [mm]
1.5 mm
constructional design
DIN 352
thread sense of rotation
right hand
coolant supply
without
chamfer form
Form C
flute characteristic
Rek. a- straight flutes
Geometry
WM
Coating
TIN
shank diameter d₂
7 mm
OAL l₁
70 mm
length of cutting edge l₂
22 mm
square ◘
5.5 mm
tap hole diameter
8.5 mm
coolant-lubricant
thread cutting oil, thread cutting paste
cutting material
HSSE
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.