GF-R30-IKZ-HB-TiCN
solid carbide thread milling cutters for internal threads
Article number GF162136.9516
Machining of internal threads.
Product features and benefits:
Smooth milling operation thanks to flutes with 30° helix angle.Predrilled tap hole necessary.Pitch-dependent.Cross-dimensional.For internal threads the diameter of the end mill should be smaller than 2/3 or 3/4 of the thread diameter.
International Material Comparison- thread symbol:
- M, MF
- nominal diameter d₁ [mm]:
- 22 mm - 999 mm
- nominal diameter [in]:
- 0.866 " - 39.331 "
- pitch [mm]:
- 2 mm
- thread orientation:
- internal
- type:
- GF-R30
- basic version:
- GF - thread milling cutter
- coolant supply:
- IKZ
- clamping flat:
- HB
- helix direction:
- R30
- shank standard:
- DIN 6535
- Coating:
- TICN
- shank diameter d₂:
- 16 mm
- direction of tool rotation:
- RH
- length of cutting edge l₂:
- 26.876 mm
- OAL l₁:
- 90 mm
- flutes /number of ridges:
- 5
- diameter of milling part dF:
- 15.9
- clamping length l₄:
- 48 mm
- cutting material:
- carbide
Technical details
- thread symbol:
- M, MF
- nominal diameter d₁ [mm]:
- 22 mm - 999 mm
- nominal diameter [in]:
- 0.866 " - 39.331 "
- pitch [mm]:
- 2 mm
- thread orientation:
- internal
- type:
- GF-R30
- basic version:
- GF - thread milling cutter
- coolant supply:
- IKZ
- clamping flat:
- HB
- helix direction:
- R30
- shank standard:
- DIN 6535
- Coating:
- TICN
- shank diameter d₂:
- 16 mm
- direction of tool rotation:
- RH
- length of cutting edge l₂:
- 26.876 mm
- OAL l₁:
- 90 mm
- flutes /number of ridges:
- 5
- diameter of milling part dF:
- 15.9
- clamping length l₄:
- 48 mm
- cutting material:
- carbide
thread symbol
M, MF
nominal diameter d₁ [mm]
22 mm - 999 mm
nominal diameter [in]
0.866 " - 39.331 "
pitch [mm]
2 mm
thread orientation
internal
type
GF-R30
basic version
GF - thread milling cutter
coolant supply
IKZ
clamping flat
HB
helix direction
R30
shank standard
DIN 6535
Coating
TICN
shank diameter d₂
16 mm
direction of tool rotation
RH
length of cutting edge l₂
26.876 mm
OAL l₁
90 mm
flutes /number of ridges
5
diameter of milling part dF
15.9
clamping length l₄
48 mm
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.