Solid Carbide End Mill TOP-Cut “Enorm”
1999A
Article number 1999A.009 | EAN 4037753502471
-
Unit of measurement: metricwithout chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cuttersRecommended ramping angle
Carbide end mill Top-Cut with lateral drive flat and long version for roughing and finishing in almost all materials.
Product features and benefits:
ENORM geometry enables low-vibration machining and universal use in almost all materials and milling processes.TIALN coating for best possible wear protection and long tool life.
International Material Comparison- cutting diameter Ød₁ [mm]:
- 9 mm
- cutting tolerance:
- f8
- cutting length l₂ [mm]:
- 22 mm
- neck length l₃ [mm]:
- 28 mm
- length of shank connection l₄:
- 30 mm
- projecting length lₐ:
- 32 mm
- overall length l₁:
- 72 mm
- neck diameter Ød₃:
- 8.7 mm
- shank diameter Ød₂ [mm]:
- 10 mm
- shank diameter tolerance:
- h5
- bevelled edge:
- 0.2 mm
- number of flutes Z:
- 4
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- product line:
- FRANKEN TOP-Cut
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535, ASME
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
Technical details
- cutting diameter Ød₁ [mm]:
- 9 mm
- cutting tolerance:
- f8
- cutting length l₂ [mm]:
- 22 mm
- neck length l₃ [mm]:
- 28 mm
- length of shank connection l₄:
- 30 mm
- projecting length lₐ:
- 32 mm
- overall length l₁:
- 72 mm
- neck diameter Ød₃:
- 8.7 mm
- shank diameter Ød₂ [mm]:
- 10 mm
- shank diameter tolerance:
- h5
- bevelled edge:
- 0.2 mm
- number of flutes Z:
- 4
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- product line:
- FRANKEN TOP-Cut
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535, ASME
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
cutting diameter Ød₁ [mm]
9 mm
cutting tolerance
f8
cutting length l₂ [mm]
22 mm
neck length l₃ [mm]
28 mm
length of shank connection l₄
30 mm
projecting length lₐ
32 mm
overall length l₁
72 mm
neck diameter Ød₃
8.7 mm
shank diameter Ød₂ [mm]
10 mm
shank diameter tolerance
h5
bevelled edge
0.2 mm
number of flutes Z
4
cutting material
carbide
category
End Mill
version
Flat Face (Bevelled Edge)
product line
FRANKEN TOP-Cut
tool interface
straight shank with side-lock clamping flat
tool interface norm
DIN 6535, ASME
coating
TIALN
internal coolant supply
without internal cooling
helix angle
35-38 deg
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.