Milling Technology - End mill cutters
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535, ASME
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
-
without chip breakerCorner radius for the stabilisation of the cutting edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Corner Radius
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 35-38 deg
-
with round, fine chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535, ASME
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 45 deg
-
with round, fine chip breakerRadius to be programmed in CAMRecommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- End Mill, High Feed Cutter
- version:
- Corner Radius (Duplex)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- ICA
- helix angle:
- 45 deg
-
with flat, fine chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535
- coating:
- TIN / TIALN
- internal coolant supply:
- ICA
- helix angle:
- 45 deg
-
with flat, fine chip breakerCorner radius for the stabilisation of the cutting edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Corner Radius
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIN / TIALN
- internal coolant supply:
- ICA
- helix angle:
- 45 deg
-
without chip breakerCorner radius for the stabilisation of the cutting edgeRecommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- End Mill
- version:
- Corner Radius
- tool interface:
- straight shank with side-lock clamping flat
- tool interface norm:
- DIN 6535
- coating:
- GLT
- internal coolant supply:
- without internal cooling
- helix angle:
- 38-40 deg
-
with round, coarse chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cuttersRecommended ramping angle
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- GLT
- internal coolant supply:
- without internal cooling
- helix angle:
- 40 deg
-
without chip breakerCorner protection chamfer (bevelled edge) for stabilisation of the edgeRecommended feed directions of the respective cutters
- cutting material:
- carbide
- category:
- End Mill
- version:
- Flat Face (Bevelled Edge)
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535, ASME
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 50 deg
-
without chip breakerHigh precision corner radius for 3D operationsRecommended feed directions of the respective cuttersPossible axial depthRecommended ramping angle
- cutting material:
- carbide
- category:
- Torus End Mill
- tool interface:
- straight shank
- tool interface norm:
- DIN 6535
- coating:
- TIALN
- internal coolant supply:
- without internal cooling
- helix angle:
- 0 deg
Carbide end mill Top-Cut in long design for roughing and finishing in almost all materials.
Carbide end mill Top-Cut in long design for roughing and finishing in almost all materials.
Carbide end mill Multi-Cut in long design, with lateral drive flat and short cutting edge for high-performance roughing in many materials.
Carbide end mill Multi-Cut Duplex in long design for high-performance roughing in almost all materials.
Carbide end mill TiNox-Cut with lateral drive flat for roughing operations in difficult-to-machine materials.
Carbide end mill TiNox-Cut in extra-long design for roughing operations in difficult-to-machine materials.
Carbide end mill Alu-Cut in long version with lateral drive flat for roughing and finishing in wrought aluminium alloys and copper alloys.
Carbide end mill Alu-Cut in long design for roughing in wrought aluminium alloys and copper alloys.
Carbide end mill Hard-Cut in extra long version for finishing high-strength materials up to 66 HRC.
Carbide torus end mill Hard-Cut with 4 flutes in short design (3xD) for finishing applications in hardened workpiece materials.