Stationary clamping device

For clamping differential housings.

Article number HD400052

  • Mounting position: vertically upright
    Clamping system SH

The stationary clamping device is designed for a milling operation of the workpiece.

Functional description:

The clamping for the centring of the workpiece is introduced hydraulically via a centring mandrel and a clamping sleeve (system SH). The face clamping is also introduced hydraulically. The clamping fingers are are swivelled in over the workpiece and press it against the fixed end stop of the clamping device. In addition, the workpiece is manually aligned in rotation via a lateral alignment unit. Two pneumatic lines are used to check the position of the alignment unit and whether a workpiece has been loaded. The release of clamping for centring and for the face clamping is initiated hydraulically.

Advantages:

- Centring resistant to soiling due to a smooth surface of the hydraulic clamping sleeve
- High repeatable positioning accuracy for centring and rotation
- Lateral alignment unit is adjustable
- All hydraulic lines inside

category:
Stationary clamping device
machining:
milling
workpiece:
housing
industry:
powertrain, transmission
clamping-Ø:
55,00 mm
connection spindle side:
cylinder ≤ 70
airflow control device:
direct
fitting position:
vertically upright
repeat accuracy at control workpiece :
0,015 mm
transferable torque:
55 Nm
outer-Ø:
318,00 mm
overall length:
246,00 mm
weight clamping device:
58 kg
weight workpiece:
2,1 kg
material workpiece:
aluminum
Technical details
category:
Stationary clamping device
machining:
milling
workpiece:
housing
industry:
powertrain, transmission
clamping-Ø:
55,00 mm
connection spindle side:
cylinder ≤ 70
airflow control device:
direct
fitting position:
vertically upright
repeat accuracy at control workpiece :
0,015 mm
transferable torque:
55 Nm
outer-Ø:
318,00 mm
overall length:
246,00 mm
weight clamping device:
58 kg
weight workpiece:
2,1 kg
material workpiece:
aluminum
category
Stationary clamping device
machining
milling
workpiece
housing
industry
powertrain, transmission
clamping-Ø
55,00 mm
connection spindle side
cylinder ≤ 70
airflow control device
direct
fitting position
vertically upright
repeat accuracy at control workpiece
0,015 mm
transferable torque
55 Nm
outer-Ø
318,00 mm
overall length
246,00 mm
weight clamping device
58 kg
weight workpiece
2,1 kg
material workpiece
aluminum