Clamping Mandrel

For clamping stator packs (electric motors).

Article number HD400053

  • Mounting position: horizontal with tailstock
    Clamping system SG

The clamping mandrel is designed for turning the outer contour of the workpiece.

Functional description:

Clamping is initiated via a drawbar on the machine side and is transmitted to the clamping bushes (system SG) via a clamping bolt. Two clamping bushes are installed one behind the other so that the entire length of the workpiece can be clamped. An intermediate bushing is located on top. The bushing is axially limited and only transmits the radial force to the workpiece. An easily removable plastic ring is provided as a protective cover on the tailstock.

Advantages:

- Protection against chips thanks to covers on both sides
- uniform distribution of the clamping force over the entire clamping length
- Clamping of different workpieces with different inside diameters via exchangeable intermediate sleeves

category:
Clamping Mandrel
machining:
turning
workpiece:
stator
industry:
powertrain
clamping-Ø:
134,00 mm
connection spindle side:
cylinder ≤ 220
connection tailstock side:
centering point
fitting position:
horizontally with tailstock
concentricity at control workpiece :
0,020 mm
outer-Ø:
235,00 mm
overall length:
640,00 mm
weight clamping device:
81 kg
material workpiece:
steel
Technical details
category:
Clamping Mandrel
machining:
turning
workpiece:
stator
industry:
powertrain
clamping-Ø:
134,00 mm
connection spindle side:
cylinder ≤ 220
connection tailstock side:
centering point
fitting position:
horizontally with tailstock
concentricity at control workpiece :
0,020 mm
outer-Ø:
235,00 mm
overall length:
640,00 mm
weight clamping device:
81 kg
material workpiece:
steel
category
Clamping Mandrel
machining
turning
workpiece
stator
industry
powertrain
clamping-Ø
134,00 mm
connection spindle side
cylinder ≤ 220
connection tailstock side
centering point
fitting position
horizontally with tailstock
concentricity at control workpiece
0,020 mm
outer-Ø
235,00 mm
overall length
640,00 mm
weight clamping device
81 kg
material workpiece
steel