GF-Ext.-IKZ-HB-TiCN
solid carbide thread milling cutters for external thread
Article number GF161156.9514
Machining of external threads.
Product features and benefits:
Tool with straight flutes.Pre-machined bolt required.Pitch-dependent.Cross-dimensional.The milling cutter diameter should be smaller than the thread diameter.
International Material Comparison- thread symbol:
- M, MF
- nominal diameter d₁ [mm]:
- 18 mm - 999 mm
- nominal diameter [in]:
- 0.709 " - 39.331 "
- pitch [mm]:
- 1.5 mm
- thread orientation:
- external
- basic version:
- GF - thread milling cutter
- type:
- GF
- coolant supply:
- IKZ
- helix direction:
- straight
- clamping flat:
- HB
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- TICN
- shank diameter d₂:
- 20 mm
- OAL l₁:
- 105 mm
- length of cutting edge l₂:
- 33.75 mm
- flutes /number of ridges:
- 5
- clamping length l₄:
- 50 mm
- diameter of milling part dF:
- 19.9
- cutting material:
- carbide
Technical details
- thread symbol:
- M, MF
- nominal diameter d₁ [mm]:
- 18 mm - 999 mm
- nominal diameter [in]:
- 0.709 " - 39.331 "
- pitch [mm]:
- 1.5 mm
- thread orientation:
- external
- basic version:
- GF - thread milling cutter
- type:
- GF
- coolant supply:
- IKZ
- helix direction:
- straight
- clamping flat:
- HB
- shank standard:
- DIN 6535
- direction of tool rotation:
- RH
- Coating:
- TICN
- shank diameter d₂:
- 20 mm
- OAL l₁:
- 105 mm
- length of cutting edge l₂:
- 33.75 mm
- flutes /number of ridges:
- 5
- clamping length l₄:
- 50 mm
- diameter of milling part dF:
- 19.9
- cutting material:
- carbide
thread symbol
M, MF
nominal diameter d₁ [mm]
18 mm - 999 mm
nominal diameter [in]
0.709 " - 39.331 "
pitch [mm]
1.5 mm
thread orientation
external
basic version
GF - thread milling cutter
type
GF
coolant supply
IKZ
helix direction
straight
clamping flat
HB
shank standard
DIN 6535
direction of tool rotation
RH
Coating
TICN
shank diameter d₂
20 mm
OAL l₁
105 mm
length of cutting edge l₂
33.75 mm
flutes /number of ridges
5
clamping length l₄
50 mm
diameter of milling part dF
19.9
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.