Stationary clamping device
For clamping differential housings.
Article number HD400052
-
Mounting position: vertically uprightClamping system SH
The stationary clamping device is designed for a milling operation of the workpiece.
Functional description:
The clamping for the centring of the workpiece is introduced hydraulically via a centring mandrel and a clamping sleeve (system SH). The face clamping is also introduced hydraulically. The clamping fingers are are swivelled in over the workpiece and press it against the fixed end stop of the clamping device. In addition, the workpiece is manually aligned in rotation via a lateral alignment unit. Two pneumatic lines are used to check the position of the alignment unit and whether a workpiece has been loaded. The release of clamping for centring and for the face clamping is initiated hydraulically.
Advantages:
- Centring resistant to soiling due to a smooth surface of the hydraulic clamping sleeve- High repeatable positioning accuracy for centring and rotation- Lateral alignment unit is adjustable- All hydraulic lines inside
- category:
- Stationary clamping device
- machining:
- milling
- workpiece:
- housing
- industry:
- powertrain, transmission
- clamping-Ø:
- 55,00 mm
- connection spindle side:
- cylinder ≤ 70
- airflow control device:
- direct
- fitting position:
- vertically upright
- repeat accuracy at control workpiece :
- 0,015 mm
- transferable torque:
- 55 Nm
- outer-Ø:
- 318,00 mm
- overall length:
- 246,00 mm
- weight clamping device:
- 58 kg
- weight workpiece:
- 2,1 kg
- material workpiece:
- aluminum
- category:
- Stationary clamping device
- machining:
- milling
- workpiece:
- housing
- industry:
- powertrain, transmission
- clamping-Ø:
- 55,00 mm
- connection spindle side:
- cylinder ≤ 70
- airflow control device:
- direct
- fitting position:
- vertically upright
- repeat accuracy at control workpiece :
- 0,015 mm
- transferable torque:
- 55 Nm
- outer-Ø:
- 318,00 mm
- overall length:
- 246,00 mm
- weight clamping device:
- 58 kg
- weight workpiece:
- 2,1 kg
- material workpiece:
- aluminum