GF-IKZ-HA-TiCN
solid carbide thread milling cutters for internal and external threads
Article number GF163726.9663
Machining of internal or external threads.
Product features and benefits:
Tool with straight flutes.Predrilled tap hole respectively premachined bolt necessary.Pitch-dependent.Cross-dimensional.The diameter of the end mill should be smaller than 2/3 respectively 3/4 of the thread diameter for internal threads.For external threads the diameter of the end mill should be smaller than the thread diameter.
International Material Comparison- thread symbol:
- PG
- nominal diameter d₁ [mm]:
- 16 mm - 999 mm
- nominal diameter [in]:
- 0.63 " - 39.331 "
- nominal size:
- 21, 29, 36, 42, 48
- pitch [mm]:
- 1.588 mm
- pitch [in]:
- 0.062 "
- threads per inch:
- 16
- thread orientation:
- internal, external
- type:
- GF
- basic version:
- GF - thread milling cutter
- coolant supply:
- IKZ
- clamping flat:
- HA
- helix direction:
- straight
- shank standard:
- DIN 6535
- Coating:
- TICN
- shank diameter d₂:
- 12 mm
- direction of tool rotation:
- RH
- length of cutting edge l₂:
- 21.438 mm
- OAL l₁:
- 80 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 11.9
- clamping length l₄:
- 45 mm
- cutting material:
- carbide
Technical details
- thread symbol:
- PG
- nominal diameter d₁ [mm]:
- 16 mm - 999 mm
- nominal diameter [in]:
- 0.63 " - 39.331 "
- nominal size:
- 21, 29, 36, 42, 48
- pitch [mm]:
- 1.588 mm
- pitch [in]:
- 0.062 "
- threads per inch:
- 16
- thread orientation:
- internal, external
- type:
- GF
- basic version:
- GF - thread milling cutter
- coolant supply:
- IKZ
- clamping flat:
- HA
- helix direction:
- straight
- shank standard:
- DIN 6535
- Coating:
- TICN
- shank diameter d₂:
- 12 mm
- direction of tool rotation:
- RH
- length of cutting edge l₂:
- 21.438 mm
- OAL l₁:
- 80 mm
- flutes /number of ridges:
- 4
- diameter of milling part dF:
- 11.9
- clamping length l₄:
- 45 mm
- cutting material:
- carbide
thread symbol
PG
nominal diameter d₁ [mm]
16 mm - 999 mm
nominal diameter [in]
0.63 " - 39.331 "
nominal size
21, 29, 36, 42, 48
pitch [mm]
1.588 mm
pitch [in]
0.062 "
threads per inch
16
thread orientation
internal, external
type
GF
basic version
GF - thread milling cutter
coolant supply
IKZ
clamping flat
HA
helix direction
straight
shank standard
DIN 6535
Coating
TICN
shank diameter d₂
12 mm
direction of tool rotation
RH
length of cutting edge l₂
21.438 mm
OAL l₁
80 mm
flutes /number of ridges
4
diameter of milling part dF
11.9
clamping length l₄
45 mm
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.