Clamping Chuck

For clamping rotor shafts and the corresponding turbine wheels.

Article number HD400006

Mounting position: vertically upright with tailstock

Clamping system SG

Clamping system SZ

The clamping chuck with pressure unit is designed for an electron beam welding process in vacuum.

Functional description:

The rotor shaft is clamped with a clamping bush (system SG) via integrated compression springs and released via a pressure bolt on the machine side. The turbine wheel is clamped via the pressure unit with a collet (system SZ). Integrated compression springs ensure the release of clamping. The turbine wheel is moved downwards by 2 mm by means of the pressure unit, until it lies flat against the rotor shaft. Electron beam welding in a vacuum welds the two parts together to form the turbocharger rotor wheel.

Advantages:

- Repeat-accurate clamping of the components for a precisely fitting contact connection

Details

category:: Clamping Chuck
machining:: welding
workpiece:: wheel, shaft
industry:: engine
clamping-Ø:: 6,00 mm / 35,20 mm
connection spindle side:: cylinder ≤ 110
connection tailstock side:: cylinder ≤ 32
fitting position:: vertically upright with tailst
concentricity at control workpiece :: 0,032 mm / 0,020 mm
transferable torque:: 3 Nm
outer-Ø:: 190,00 mm
overall length:: 290,00 mm
weight clamping device:: 22 kg
weight workpiece:: 0,02 kg / 0,1 kg
material workpiece:: quenched and tempered steel

Downloads

Technical details

category:: Clamping Chuck
machining:: welding
workpiece:: wheel, shaft
industry:: engine
clamping-Ø:: 6,00 mm / 35,20 mm
connection spindle side:: cylinder ≤ 110
connection tailstock side:: cylinder ≤ 32
fitting position:: vertically upright with tailst
concentricity at control workpiece :: 0,032 mm / 0,020 mm
transferable torque:: 3 Nm
outer-Ø:: 190,00 mm
overall length:: 290,00 mm
weight clamping device:: 22 kg
weight workpiece:: 0,02 kg / 0,1 kg
material workpiece:: quenched and tempered steel