GF-Z-R15-IKZ-HA
solid carbide thread milling cutters for internal and external threads
Article number GF165961.9545
Machining of internal or external threads.
Product features and benefits:
Short machining time due to more flutes.Deep thread possible thanks to long thread part.Smooth milling operation thanks to flutes with 15° helix angle.Predrilled tap hole respectively premachined bolt necessary.Pitch-dependent.Cross-dimensional.The diameter of the end mill should be smaller than 2/3 respectively 3/4 of the thread diameter for internal threads.
For external threads the diameter of the end mill should be smaller than the thread diameter.
International Material Comparison- thread orientation:
- internal, external
- basic version:
- GF - thread milling cutter
- type:
- GF-Z-R15
- coolant supply:
- IKZ
- helix direction:
- R15
- clamping flat:
- HA
- shank standard:
- DIN 6535
- Coating:
- without
- length of cutting edge l₂:
- 20.724 mm
- flutes /number of ridges:
- 6
- clamping length l₄:
- 40 mm
- diameter of milling part dF:
- 9.9
- cutting material:
- carbide
Technical details
- thread orientation:
- internal, external
- basic version:
- GF - thread milling cutter
- type:
- GF-Z-R15
- coolant supply:
- IKZ
- helix direction:
- R15
- clamping flat:
- HA
- shank standard:
- DIN 6535
- Coating:
- without
- length of cutting edge l₂:
- 20.724 mm
- flutes /number of ridges:
- 6
- clamping length l₄:
- 40 mm
- diameter of milling part dF:
- 9.9
- cutting material:
- carbide
thread orientation
internal, external
basic version
GF - thread milling cutter
type
GF-Z-R15
coolant supply
IKZ
helix direction
R15
clamping flat
HA
shank standard
DIN 6535
Coating
without
length of cutting edge l₂
20.724 mm
flutes /number of ridges
6
clamping length l₄
40 mm
diameter of milling part dF
9.9
cutting material
carbide
Cutting value calculator
Calculator result
The cutting data shown are approximate values
which must be adapted to the conditions of use.
which must be adapted to the conditions of use.