Milling Technology - Indexable milling cutters and inserts

255 suitable variants
    • Radius to be programmed in CAM
      Recommended feed directions of the respective cutters
      The specific angle of 3° is the recommended angle for ramping applications
      Holders for screw-in end mills

    Screw-in milling body for high-feed milling with Time-S4-Cut indexable inserts (IC 8.5).

    category:
    Time-S4-Cut
    version:
    Milling Body for Inserts
    internal coolant supply:
    ICR
    • Recommended feed directions of the respective cutters
      The specific angle of 3° is the recommended angle for ramping applications
      Holders for shell-type milling cutters

    Shell-type milling body, DIN 138, for roughing and finishing applications with rhombic indexable inserts (IC 9.2).

    category:
    Rhombic
    version:
    Milling Body for Inserts
    tool interface:
    Bore with Standard Driving Slot
    tool interface norm:
    DIN 138
    internal coolant supply:
    ICR
    • Radius to be programmed in CAM

    Time-S4-Cut carbide indexable insert (IC 8.5) for high-feed milling of 2D and 3D contours in low-alloy steel materials.

    cutting material:
    PE6
    category:
    Time-S4-Cut
    version:
    Indexable Insert
    coating:
    TIALN
    • High precision corner radius for 3D-operations

    Carbide torus insert for HSC pre-finishing and HSC finishing of 2D and 3D contours in steel materials and long-chipping copper alloys.

    cutting material:
    KP1
    category:
    Torus
    chip former:
    20 deg
    version:
    Exchangable Insert
    coating:
    TIALN
    • Recommended feed directions of the respective cutters
      The specific angle of 3° is the recommended angle for ramping applications
      Holders for shell-type milling cutters

    Shell-type milling body, DIN 138, for roughing and finishing applications with round indexable inserts (IC 16).

    category:
    Round
    version:
    Milling Body for Inserts
    tool interface:
    Bore with Standard Driving Slot
    tool interface norm:
    DIN 138
    internal coolant supply:
    ICR
    • Recommended feed directions of the respective cutters
      The specific angle of 3° is the recommended angle for ramping applications
      Holders for shell-type milling cutters

    Shell-type milling body, DIN 138, for roughing and finishing applications with round indexable inserts (IC 10).

    category:
    Round
    version:
    Milling Body for Inserts
    tool interface:
    Bore with Standard Driving Slot
    tool interface norm:
    DIN 138
    internal coolant supply:
    ICR
    • Recommended feed directions of the respective cutters
      The specific angle of 3° is the recommended angle for ramping applications
      Holders for shell-type milling cutters

    Shell-type milling body, DIN 138, for roughing and finishing applications with round indexable inserts (IC 12).

    category:
    Round
    version:
    Milling Body for Inserts
    tool interface:
    Bore with Standard Driving Slot
    tool interface norm:
    DIN 138
    internal coolant supply:
    ICR
    • Radius to be programmed in CAM
      Recommended feed directions of the respective cutters
      The specific angle of 3° is the recommended angle for ramping applications
      Holders for shell-type milling cutters

    Shell-type milling body, DIN 138, for high-feed milling with Time-S-Cut indexable inserts (IC 12.5).

    category:
    Time-S-Cut
    version:
    Milling Body for Inserts
    tool interface:
    Bore with Standard Driving Slot
    tool interface norm:
    DIN 138
    internal coolant supply:
    ICR
    • Radius to be programmed in CAM
      Recommended feed directions of the respective cutters
      The specific angle of 3° is the recommended angle for ramping applications
      Holders for shell-type milling cutters

    Shell-type milling body, DIN 138, for high-feed milling with Time-S4-Cut indexable inserts (IC 8.5).

    category:
    Time-S4-Cut
    version:
    Milling Body for Inserts
    tool interface:
    Bore with Standard Driving Slot
    tool interface norm:
    DIN 138
    internal coolant supply:
    ICR
    • Radius to be programmed in CAM
      Recommended feed directions of the respective cutters
      The specific angle of 3° is the recommended angle for ramping applications
      Holders for shell-type milling cutters

    Shell-type milling body, DIN 138, for high-feed milling with Time-S-Cut indexable inserts (IC 8).

    category:
    Time-S-Cut
    version:
    Milling Body for Inserts
    tool interface:
    Bore with Standard Driving Slot
    tool interface norm:
    DIN 138
    internal coolant supply:
    ICR