Milling Technology - Cutters with assembly hole
-
with round, coarse chip breaker
Corner protection chamfer (bevelled edge) for stabilisation of the edge
Recommended feed directions of the respective cutters
- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- TICN
- helix angle:
- 25 deg
-
without chip breaker
Sharp-edged
Recommended feed directions of the respective cutters
- cutting material:
- HSSE
- category:
- Shell End Mill
- tool interface:
- Bore with Keyway, Driving Slot
- tool interface norm:
- DIN 138
- coating:
- TICN
- helix angle:
- 25 deg
-
without chip breaker
- cutting material:
- HSSE
- category:
- Side and Face Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSS
- category:
- V-Shaped Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSS
- category:
- Metal Slitting Saws
- tool interface:
- Straight bore
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSSE
- category:
- Side and Face Milling Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSSE
- category:
- Radius Cutter
- tool interface:
- Bore with Standard Keyway
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- HSS
- category:
- Metal Slitting Saws
- tool interface:
- Straight bore
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- carbide
- category:
- Metal Slitting Saws
- tool interface:
- Straight bore
- tool interface norm:
- DIN 138
-
without chip breaker
- cutting material:
- carbide
- category:
- Metal Slitting Saws
- tool interface:
- Straight bore
- tool interface norm:
- DIN 138
HSS shell end mill, DIN 1880, for face and shoulder milling with high material removal (roughing applications) in simple steel and cast materials as well as copper alloys.
HSS shell end mill, DIN 1880, for face and shoulder milling with low cutting depths (finishing applications) in almost all steel materials and non-ferrous metals.
HSS side and face milling cutter, DIN 138/885, with coarse staggered toothing for milling deep slots, cutting-off or cutting to length of steel and cast materials as well as short-chipping non-ferrous metals.
HSS double-angle milling cutter, DIN 138/DIN 847, for milling prismatic notches or guides as well as chamfering in steel, cast iron or short-chipping non-ferrous materials.
HSS metal slitting saw, DIN 138, fine toothing, for milling slots, cutting-off or cutting to length in steel and cast materials as well as short-chipping non-ferrous metals.
HSS side and face milling cutter, DIN 138/885, with staggered toothing for milling deep slots, cutting-off or cutting to length of steel and cast materials as well as short-chipping non-ferrous metals.
HSS radius cutter, DIN 138/DIN 856, for milling in steel, cast iron or short-chipping non-ferrous materials.
HSS metal slitting saw, DIN 138, coarse toothing, for milling slots, cutting-off or cutting to length in steel and cast materials as well as short-chipping non-ferrous metals.
Carbide metal slitting saw, fine toothing, for milling slots, cutting-off or cutting to length in almost all steel materials and non-ferrous metals.
Carbide metal slitting saw, coarse toothing, for milling slots, cutting-off or cutting to length in almost all steel materials and non-ferrous metals.