Stationary clamping device
For clamping of turbocharger housings.
Article number HD400088
-
Mounting position: vertically uprightClamping system SM
The stationary clamping device is designed for a drilling and milling operation of the workpiece.
Functional description:
The turbocharger housing is centred hydraulically via the diaphragm, and the face clamping via swivelling clamping hooks. In this way high cutting forces can be absorbed. The alignment is possible in all three axes and the open design allows 5-sided machining without reclamping with optimum chip removal. The clamping device is fully protected against corrosion thanks to special materials.
Advantages:
- Low-deformation clamping of thin-walled components thanks to additional face clamping- The end stop is equipped with air system control- High repeatable positioning accuracy for centring and rotation- Resistant to soiling thanks to diaphragm design-Tools have optimum accessibility to the workpiece contour thanks to a large operning in the clamping device- Centring of the workpiece only by the inherent tension of the diaphragm with very low radial clamping jaw force , thus hardly any disturbing influence on the rotational alignment
- category:
- Stationary clamping device
- machining:
- drill, milling
- workpiece:
- housing
- industry:
- engine
- clamping-Ø:
- 111,00 mm
- connection spindle side:
- face location
- airflow control device:
- direct
- fitting position:
- vertically upright
- repeat accuracy at control workpiece :
- 0,010 mm
- transferable torque:
- 20 Nm
- outer-Ø:
- 276,00 mm
- overall length:
- 300,00 mm
- weight clamping device:
- 60 kg
- weight workpiece:
- 2 kg
- material workpiece:
- cast iron
- category:
- Stationary clamping device
- machining:
- drill, milling
- workpiece:
- housing
- industry:
- engine
- clamping-Ø:
- 111,00 mm
- connection spindle side:
- face location
- airflow control device:
- direct
- fitting position:
- vertically upright
- repeat accuracy at control workpiece :
- 0,010 mm
- transferable torque:
- 20 Nm
- outer-Ø:
- 276,00 mm
- overall length:
- 300,00 mm
- weight clamping device:
- 60 kg
- weight workpiece:
- 2 kg
- material workpiece:
- cast iron