Clamping Chuck
For clamping pinion shafts.
Article number HD400003
-
Mounting position: horizontalMounting position: vertically suspendedClamping system SG
The clamping chuck is designed for a gear milling operation on the tapered outer diameter of the workpiece.
Functional description:
Clamping is initiated via a drawbar on the machine side. The clamping bush (system SG) is actuated via a drawbar with intermediate piece by exceeding the idle stroke. An integrated disk spring assembly supports the clamping bush during unclamping. Interchangeable clamping sets, consisting of intermediate bush and end stop, were installed for the different workpiece sizes.
Advantages:
- slim design- machining of different workpiece sizes thanks to quick-change clamping elements- modular design
- category:
- Clamping Chuck
- machining:
- toothing
- workpiece:
- gear
- industry:
- transmission, toothing, powertrain, measure & test
- clamping-Ø:
- 40,00 mm
- connection spindle side:
- SK steep taper
- airflow control device:
- direct
- fitting position:
- horizontal, vertically pending
- concentricity at control workpiece :
- 0,008 mm
- transferable torque:
- 62 Nm
- outer-Ø:
- 165,00 mm
- overall length:
- 522,50 mm
- weight clamping device:
- 17 kg
Technical details
- category:
- Clamping Chuck
- machining:
- toothing
- workpiece:
- gear
- industry:
- transmission, toothing, powertrain, measure & test
- clamping-Ø:
- 40,00 mm
- connection spindle side:
- SK steep taper
- airflow control device:
- direct
- fitting position:
- horizontal, vertically pending
- concentricity at control workpiece :
- 0,008 mm
- transferable torque:
- 62 Nm
- outer-Ø:
- 165,00 mm
- overall length:
- 522,50 mm
- weight clamping device:
- 17 kg
category
Clamping Chuck
machining
toothing
workpiece
gear
industry
transmission, toothing, powertrain, measure & test
clamping-Ø
40,00 mm
connection spindle side
SK steep taper
airflow control device
direct
fitting position
horizontal, vertically pending
concentricity at control workpiece
0,008 mm
transferable torque
62 Nm
outer-Ø
165,00 mm
overall length
522,50 mm
weight clamping device
17 kg