Clamping Mandrel

For clamping gear wheels.

Article number HD400087

  • Mounting position: vertically upright
    Clamping system SP

The clamping mandrel is designed for grinding the external gearing of the workpiece.

Functional description:

The clamping is initiated hydraulically via an integrated piston and is transmitted via a clamping bolt to the clamping bush (system SP). The opposite piston surface is used and reversed by a deflection roller in order to be able to generate the greatest possible clamping force. This allows for a compact and short design. The clamping sleeve (system SP) is designed for two clamping areas. The clamping mandrel is assembled on the machine side by means of a hydraulic quick-change chuck.

Advantages:

- Two independent clamping levels for accurate and repeatable workpiece alignment
- Slim design is optimally adapted to the work path of the swivelled grinding worm.
- Air system control available

category:
Clamping Mandrel
machining:
toothing
workpiece:
gear
industry:
toothing
clamping-Ø:
31,00 mm / 35,00 mm
connection spindle side:
cylinder ≤ 70
airflow control device:
direct
clamping tool quick-changeable:
yes
fitting position:
vertically upright
concentricity at control workpiece :
0,006 mm
transferable torque:
15 Nm
outer-Ø:
80,00 mm
overall length:
237,00 mm
weight clamping device:
3,5 kg
weight workpiece:
0,4 kg
material workpiece:
steel
Technical details
category:
Clamping Mandrel
machining:
toothing
workpiece:
gear
industry:
toothing
clamping-Ø:
31,00 mm / 35,00 mm
connection spindle side:
cylinder ≤ 70
airflow control device:
direct
clamping tool quick-changeable:
yes
fitting position:
vertically upright
concentricity at control workpiece :
0,006 mm
transferable torque:
15 Nm
outer-Ø:
80,00 mm
overall length:
237,00 mm
weight clamping device:
3,5 kg
weight workpiece:
0,4 kg
material workpiece:
steel
category
Clamping Mandrel
machining
toothing
workpiece
gear
industry
toothing
clamping-Ø
31,00 mm / 35,00 mm
connection spindle side
cylinder ≤ 70
airflow control device
direct
clamping tool quick-changeable
yes
fitting position
vertically upright
concentricity at control workpiece
0,006 mm
transferable torque
15 Nm
outer-Ø
80,00 mm
overall length
237,00 mm
weight clamping device
3,5 kg
weight workpiece
0,4 kg
material workpiece
steel