Clamping Mandrel
For clamping of jewellery rings.
Article number HD400051
-
Mounting position: horizontalClamping system SZ
The clamping mandrel is designed for a face turning operation of the workpiece.
Functional description:
Clamping is initiated via a thrust bar on the machine and is transmitted to the collet (system SZ) via a thrust piece and a clamping bolt. Due to the narrow clamping range the collet is mounted in a fixed position and cannot be moved axially. The release of clamping is initiated via integrated compression springs.
Advantages:
- low-deformation clamping of filigree components- optimum surface protection of the bore on the workpiece thanks to polished slot edges and polished clamping cover of the collet- slim design
- category:
- Clamping Mandrel
- machining:
- turning
- workpiece:
- ring
- industry:
- optics & micro
- clamping-Ø:
- 9,10 mm
- connection spindle side:
- short taper 3
- fitting position:
- horizontal
- concentricity at control workpiece :
- 0,030 mm
- transferable torque:
- 4 Nm
- outer-Ø:
- 70,00 mm
- overall length:
- 155,00 mm
- weight clamping device:
- 1,5 kg
Technical details
- category:
- Clamping Mandrel
- machining:
- turning
- workpiece:
- ring
- industry:
- optics & micro
- clamping-Ø:
- 9,10 mm
- connection spindle side:
- short taper 3
- fitting position:
- horizontal
- concentricity at control workpiece :
- 0,030 mm
- transferable torque:
- 4 Nm
- outer-Ø:
- 70,00 mm
- overall length:
- 155,00 mm
- weight clamping device:
- 1,5 kg
category
Clamping Mandrel
machining
turning
workpiece
ring
industry
optics & micro
clamping-Ø
9,10 mm
connection spindle side
short taper 3
fitting position
horizontal
concentricity at control workpiece
0,030 mm
transferable torque
4 Nm
outer-Ø
70,00 mm
overall length
155,00 mm
weight clamping device
1,5 kg